,

Axion RGBWW Recessed Gimbal Downlights

$45.00 – $55.00

Introducing the gimbal mount version of our popular downlights for the ultimate installation flexibility. Not only that, but they also now offer tunable white with a dedicated 2700K and 6500K white LED. Controllable using our DMX Controller, DMX Decoders or any 24V compatible product.

SKU: N/A Categories: ,

Looking for the ultimate low voltage recessed downlight? Our new Axion RGBWW gimbal downlights build upon our incredibly successful V2 units but  add two key features, namely tunable white LEDs and gimbal movement meaning you can now mix the color temperature between 2700K and 6500K as well point the light beam exactly where you want it. Great if you’re looking to highlight wall art, a unique display, or even normal daily use!

This new fixture uses COB technology, so it provides a consistent and even color/white light output in addition to the following features:

  • Gimbal movement so you can exactly position the light output where you want it. Need to illuminate a wall, more precisely cover seating positions in a theater or stage? No problem, the entire center section is designed to be rotated at extreme angles.
  • No diffuser so you get maximum output from the COB LEDs in a nice consistent display.
  • As a 24-volt based downlight, you get all the benefits of being low voltage but less voltage drop and longer runs are now possible versus standard 12-volt units. 
  • Two dedicated white LEDs so you can tune the perfect color temperature between 2700K and 6500K. Perfect for those systems looking to take advantage of natural circadian rhythm programming.
  • The die cast aluminum shell is powder coated white, giving it a nice clean look. Note: The entire assembly will act as a heat sink, so it is recommended you give adequate air flow and do not install insulation directly on top of the unit. 
  • 3-year warranty so you know it will last.

Why limit yourself to a single white color when installing recessed ceiling lights? 

Leveraging these fixtures and our robust DMX Controller along with a 5-channel DMX Decoder you can create a whole house system that is low voltage, dimmable, and easily integrates with popular control system platforms.

Installation is simple and can be used in a new-construction or retrofit scenarios. Simply connect the RGBWW color wires to your DMX LED Decoder like any other linear light strip. 

The best part of our 24-volt system is that it’s low voltage so you don’t have to be an electrician to install! 

Weight N/A
Dimensions N/A
Size

4" – 7W, 5" – 12W

Specifications

  4” Indoor 5” Indoor
Voltage 24 Volt 24 Volt
Max Wattage 7 Watt 12 Watt
Color Type RGBWW (RGB + Tunable White) RGBWW (RGB + Tunable White)
White Temp 2700K and 6500K 2700K and 6500K
Beam Angle 90 degrees 90 degrees
Size 109 mm x 35 mm tall
4.29 in x 1.38 in tall		 136 mm x 55 mm tall
5.35 in x 2.17 in tall
Cut Hole 85 – 100 mm
3.35 in – 3.94 in		 120 – 125 mm
4.72 in – 4.92 in
CRI Ra > 80 > 80
Housing Material Die cast Aluminum Die cast Aluminum
Warranty 3 Years 3 Years
Weather Rating IP22 – Resistant to dust or objects that are over 12mm in size. No protection against water jets. Indoor use only. IP22 – Resistant to dust or objects that are over 12mm in size. No protection against water jets. Indoor use only.

Installation Instructions

Installation Requirements

  • Before you begin installation, please verify that 24-volt power is off. It is recommended you disconnect the power supply before starting.
  • When installing in a ceiling, it is highly recommended you do not cover the top of the fixture with insulation. It is ok for it to be surrounded by insulation, but adequate airflow will ensure the heat sync can cool the fixture and provide better longevity and performance.
  • To help create a better seal between the fixture and drywall, installation of a vapor barrier prior can help reduce air entering/leaving the attic.
  • Although this document does not cover the power supply or system integration, it is worth noting that all dimming happens on the DC output side and these low voltage fixtures should not be hooked up to a 120V or 220V dimmer.
  • Do not hold the fixture by the RGBWW+ cable.
  • Please check the contents of the package before installation for damage.
  • We recommend bench testing before installation.
  • ALL WIRING AND INSTALLATION SHOULD ADHERE TO LOCAL AND NATIONAL WIRING STANDARDS.

Safety

  • The fixture is 24VDC; connecting it to 12VDC, 120/240/220 AC will void the warranty and cause permanent damage.
  • Do not wire the fixture into a DMX decoder or power supply that is energized.
  • All dimming happens on the 24V side and should be done with a compatible PWM device.
  • Do not install in an environment that is fully sealed. The heat sink must have airflow to properly cool the device.
  • Do not install in environments that constantly see humidity levels above 70%.
  • Before servicing the fixture, disconnect power and allow time for it to cool.
  • Use care when handling the fixture. Do not expose the device to chemicals or other substances which may be corrosive.
  • Never soak or submerge the fixture in water.

Installation Instructions

  • First, identify the location where the lighting fixture will be installed.
    • Verify there are no obstructions above the area including beams, pipes, electrical wires, studs, etc.
  • Cut out the provided template from the top of the shipping box and trace the cut-out hole on the ceiling.
  • Using a drywall saw or other suitable device, cut out the installation hole.
  • At this point, run your wire from the DMX decoder (or other control device) to the first fixture. Multiple fixtures can be linked together using a single home-run wire.
    • The longer the run, the thicker or lower gauge wire is recommended to help prevent voltage drop.
    • You will need a cable with 6 wires if leveraging all Red, Green, Blue, and both White LEDs (plus one for power).
  • Wires can be joined using any suitable appropriate for the gauge wire such as: dolphin connectors, butt connectors, crimp connectors or even soldering.
  • Once the wires have been properly joined, place the fixture into the ceiling.
  • Push up on the spring flanges so they extend up towards the heat sink, then carefully work the light into the hole. Once inside the cut-out hole, release the spring flanges and it will fully seat.
  • Apply power and test that you now have control. If certain colors do not seem to work, verify you have a solid connection.

Wiring Color Code

Red Wire = Red LED Color

Green Wire = Green LED Color

Black Wire = Blue LED Color

Yellow Wire = 2700K White LED Color

White Wire = 6500K White LED Color

Brown Wire = 24v Power Positive +

Reviews

There are no reviews yet.

Be the first to review “Axion RGBWW Recessed Gimbal Downlights”

Your email address will not be published. Required fields are marked *

Related products

Shopping Cart