Our new V2 PoE and Wi-Fi DMX controller builds upon all the great features of the original unit but now has enhanced wireless range and reliability plus expanded memory so we can bring you great new local UI enhancements in an upcoming free firmware update. Our DMX controller is perfect for integrating any of our decoders, light fixtures, and general DMX controllable devices into your control system of choice. Plug and play operation ensures you spend less time installing, configuring, testing, and troubleshooting jobs.
This is a commercial grade DMX controller designed to deliver unparalleled reliability with a specific focus on the best possible integration possible giving full control of DMX devices in Control4, Crestron, Elan, URC, RTI, and Extron systems. Since our controller supports both PoE and Wi-Fi we have enabled Art-Net support in the latest firmware, giving you stand-alone control using any number of apps or programs such as Lightkey, QLC+, or Aurora DMX.
The overall solution is designed to give our partners highly flexible, modular installation options that can grow as needs and preferences change. The Axion DMX controller is primarily targeted at single color, tunable white, RGB, RGBW and RGB+Tunable White fixtures, but because it interacts using the DMX512 protocol it will also support many other devices such as motors, lasers, smoke machines, and more.
The pinout for the DMX controller is as follows:
1: Data + 2: DATA – 3-6: Empty 7-8: Ground
Warranty: 2 years Certifications: FCC, CE, RoHS
Example Hardware Configuration
Engineered & Manufactured in the USA
Weight
1 lbs
Dimensions
7 × 5 × 5 in
Instructions
Once the controller has been connected to the network, you may either leave it DHCP, configure a DHCP reservation, or assign a static IP address. If you are integrating with Control4, the SDDP protocol is fully supported, and the device will show up in the “Discovered” tab of Composer Pro. If you are using any other control system, it is recommended you either set a static IP or DHCP reservation in your router.
Operation
Factory Reset
To perform a factory reset, simply hold in the reset button, then apply power. This will reset the password to ‘password’ and revert the IP settings back to DHCP. It will also clear the Wi-Fi network association if one had been set.
Password & Username
There is no username, leave this field blank. The default password is “password”. It is highly recommended that you change the default password via the local UI to maintain the utmost security. This same password is used when integrating to the control system and should be updated in any drivers or modules you are using.
FAQs
How many devices can a single Axion DMX Controller integrate with?
Each Axion DMX controller can operate 512 channels. This means it could control 512 unique white LED strips, 170 RGB strips, or 128 RGBW strips. Each address is simply another control point.
Can I link multiple DMX endpoints together?
Yes! That’s the great thing about DMX; you will notice that almost every decoder or device has a DMX input and DMX output. Simply use a CAT5 (or any category cable) to link from one output to the input of another device. This helps provide for an extremely modular system.
Can I have more than one Axion DMX Controller in a project?
Absolutely, there is no limit to the number of controllers you can add. We have designed all the control system integration drivers and modules such that you can add multiple per project.
Does this work as a “centralized” solution?
A centralized solution is where the equipment is in one “central” location such as a closet, basement, rack, backer board, low voltage panel, etc. The Axion DMX Controller works perfectly in this circumstance and is preferred. A typical install includes mounting the Axion Controller to a back board, next to the necessary amount of Axion DMX Decoders all linked via CAT5 cables. Then, run speaker or security wire to your final locations of the lights/LED strips.
Can I use speaker or security wire to connect the lights or LED strips?
Make sure you are using wire that has enough connectors for each unique channel plus power. For example, if using an RGB LED strip, you would need a 4-conductor wire, one for each color plus power.
Be aware of voltage drop! The longer the run, the thicker (or lower number) gauge wire you use will help prevent flickering or light level inconsistencies across the LED strip. We recommend 16/6 or 18/6 speaker or general purpose wire.
What power supply do I use?
The Axion DMX controller is either powered via PoE (perfect for rack or centralized solutions) or a 48V PoE injector if using it in wireless mode.
The Axion DMX decoders are all powered via the same 12/24-volt power supply used to power the LED lights.
Some DMX LED lighting solutions have built in power supplies and even a decoder. In those situations, simply plug in the fixture and connect the DMX input to the Axion DMX Controller’s DMX output.
LED strips. It’s possible to power all of them, especially in a centralized install, using a single 12/24-volt power supply. First, verify if your light strips are all 12 or 24 volts. Next, add together the recommended power consumption or rating for each LED strip length you are connecting, account for voltage drop over longer runs, and purchase a power supply that meets the minimum number you calculated plus 10%.
Remember! Low voltage DC power supplies will only provide the amount of current needed so you can’t over-specify the output. Bigger is better and allows for future expansion.
What order are the channels?
No matter what LED light strip or fixture you are using, they should be wired in RGBW format. EG: if DMX start address is 12, then 12 = Red, 13 = Green, 14 = Blue, 15 = White
The Axion DMX Lighting Controller enables you to fully control a DMX512 system via IP without the complexity of traditional expensive counterparts. It also delivers a more reliable solution compared to standard consumer Wi-Fi enabled individual lighting options.
Since the controller supports SDDP, you can either integrate via DHCP or assign the unit a static IP address.
Features
Compatible with all DMX512 lighting loads, including devices like lasers and smoke machines
Individually addressable, reliable wired bus supports exact timing and dimming
Auto Discovery via SDDP
Supports connecting the driver to keypad buttons (with LED feedback), allowing for quick on/off/toggle programming
Two-way feedback from the device.
Trigger any of the pre-programmed color effects
Quick Start Guide
Add the controller driver to project (or double-click on the device in the Discovered tab)
If you didn’t use SDDP, enter the IP address under the Network section of the Connections tab.
Add as many “Axion DMX RGBW Dimmer” drivers as you have independent lighting loads.
EG: If you have a 3 channel DMX decoder controlling 3 individual white LED strips, you will add 3 dimmer drivers to control each independently.
EG: If you have a 4 channel DMX decoder with 1 LED strip that has Red, Green, Blue and White, then you would just add 1 dimmer
These drivers use the RGBW color system. Red, Green, Blue and White use 8 bits each, which have integer values from 0 to 255 where 0 indicates that color is turned off and 255 means the color is at full brightness.
On the Dimmer driver, first enter the beginning DMX address of the device you are integrating.
Then, select the type of device you are controlling from the drop down.
Click on connections
Verify the Axion DMX Control connection is bound to your Dimmer drivers
Connections
Axion DMX Control
Used for communications between the dimmer driver and controller driver.
ON Button Link
Bind this to a keypad to directly control the ON aspect of the light.
OFF Button Link
Bind this to a keypad to directly control the OFF aspect of the light.
Toggle Button Link
Bind this to a keypad to toggle the light ON and OFF from a physical button.
Commands
Save Preset
Save the current channel level and ramp rate to a save slot 1-4.
Recall Preset
Recall channel level and ramp rate from a save slot 1-4.
Set Theme
Sets a color theme.
Set Effect
Starts an effect with a given interval (how long for each color) for a given amount of time. NOTE! The default duration of 0 will run forever and only stop when you issue a Stop Effect command. Only one effect can be active at a time.
Stop Effect
Stops the current effect.
ELAN
Download the latest – Axion DMX ELAN V18 – Now with support for Pixel LED effects
Overview
The Axion DMX Lighting Controller enables you to fully control a DMX512 system via IP without the complexity of traditional expensive counterparts. It also delivers a more reliable solution compared to standard consumer Wi-Fi enabled individual lighting options.
It is highly recommended you configure the DMX Controller with a static IP address, or DHCP reservation.
Features
Compatible with all DMX512 lighting loads, including devices like lasers and smoke machines
Individually addressable, reliable wired bus supports exact timing and dimming
Two-way feedback from the device.
Trigger any of the pre-programmed color effects
Quick Start Guide
Add the controller driver in Configurator under the lighting category as a lighting interface.
On the controller driver, first enter the system password if it differs from the factory default.
Enter a value for the ramp rate for controlling the lighting devices.
Finally, enter the IP Address and apply all settings.
Next add light objects and follow the guidelines below to configure each light load
Lighting Objects
Dimmer
Dimmer that adjusts the the level for a white channel. Enter the channel number for each light
object.
Dimmer RGB
Dimmer that adjusts the level for a red, green, and blue channels. Enter the channel numbers
for each light object.
Dimmer Spectrum
Dimmer that adjusts the level for a red, green, blue, and white channels. Enter the channel
numbers for each light object.
Scene
Scene Object that activates and deactivates effects on a given sets of channels. Enter the
channel numbers as a comma delimited list and effect name exactly as shown for each light
objects. See supported effects for a full list.
Supported Effects
Blink
Turns on and off a selected color on a given interval.
Example Device Tags for blink scene object on an RGBW strip with an interval of 5 seconds
Effect: Blink
Channels:0,1,2,3
Options:5
Glow
Ramps up and down a selected color on a given interval.
Example Device Tags for Glow scene object on an RGBW strip with an ramp of 5 seconds
Effect: Glow
Channels:0,1,2,3
Options:5
Rainbow
Ramps up and down a selected color on a given interval.
Example Device Tags for Glow scene object on an RGB strip with an ramp of 5 seconds
These modules integrate an Axion DMX Lighting Controller into a Crestron Control System via TCP/IP.
Features:
Demo Program and Demo UI
Hub and Light Module
2-Way Feedback
Independent RGBW control
Dimming control
Themes
Polling
Controller Information (model, firmware version)
The Axion DMX Lighting Controller enables you to fully control a DMX512 system via IP without the complexity of traditional expensive counterparts. It also delivers a more reliable solution compared to standard consumer Wi-Fi enabled individual lighting options.
Compatible with all DMX512 lighting loads, including devices like lasers and smoke machines
Individually addressable, reliable wired bus supports exact timing and dimming
Two-way feedback from the device.
A demo project is provided with a sample Simpl Windows program and Vision Tools UI that demonstrates how to configure and use these modules with the Axion DMX Lighting Controller. See screenshots below of sample UI.
The Axion DMX Lighting Controller enables you to fully control a DMX512 system via IP without the complexity of traditional expensive counterparts. It also delivers a more reliable solution compared to standard consumer Wi-Fi enabled individual lighting options.
Recommended to assign a DHCP reservation or assign the unit a static IP address.
Features
Compatible with all DMX512 lighting loads, including devices like lasers and smoke machines
Individually addressable, reliable wired bus supports exact timing and dimming
Two-way feedback from the device.
Trigger any of the pre-programmed color effects
Quick Start Guide
Add the controller driver to project.
Enter the IP address of the controller.
Enter the system password of the controller.
Functions
System Control
Reboot – Reboots the controller.
Light Control
Get Level – Gets the level for a given channel.
Set Level – Sets the level for a given channel with optional rate and delay.
Save Preset – Saves the current channels level in a preset slot.
Recall Preset – Recalls the current channels level that was saved in that preset slot.
Themes
Activate – Activates an RGB enabled theme on your light with optional rate and delay. Start Channel should be the RED Channel. Theme’s randomize with each activation!
Variables
System Information
Model – Model of the controller.
Firmware Version – Current firmware version running on the controller.
Light Information
Channel X Level – Current Level of the channel.
Events
Controller Reboot – Fires when the controller has rebooted.
The URC integration gives installers access to the full range of capabilities offered through our controller, is easy to install and customize to fit any installation.
Programming the module is simple. Step-by-step instructions are provided in the URC device Integration Guide. Log in to your account, view the URC Axion TCM, select the RESOURCES tab, and download the integration guide.
The integration guide covers the set-up of the module in the URC programming software. It assumes that you have already completed training in the programming software and that the device is already set up and working with the native system.
Need assistance? Please call URC Technical Support at 1-800-901-0800.
Features:
Utilizes URC’s Unified Lighting Control User Interface.
Supports DMX control of industry standard DMX devices and solutions.
Engineered & Manufactured in the USA
Reviews
There are no reviews yet.